SUPPLY OF ADVERTISING MATERIAL
Sizes (width x depth):

Description	Width x Height
Front Page	Contact Greg King
Full Page	210mm x 297mm
Horizontal Half Page	190mm x 130mm
Medium Half Page	125mm x 200mm
Horizontal One Third Page	190mm x 90mm
Medium One Third Page	125mm x 140mm
Vertical One Third Page	60mm x 270mm
5cm x 4col Strip	190mm x 50mm
Horizontal Quarter Page	125mm x 90mm
Vertical Quarter Page	60mm x 180mm
Mini Advert	60mm x 90mm

Magazine Trim Size:
Full A4 (210mm x 297mm)

BLEED REQUIRMENT
3mm Minimum
(216mm x 303mm)

for more information on Bleed please click here
Please do not set your document to the bleed size and please do not draw your own trims, the application you are using to create your artwork should be capable of drawing the trims when you export to one of the acceptable formats!

All advertising is to be supplied on computer disk or via email to the following specifications, if it is not in one of the formats listed we may not be able to use your supplied material:

Equipment Used:

Apple Macintosh

Software:

• Quark Express 7.0
• Adobe Creative Suite 3 (CS3)

Colour Specs:

All files must be Process Colour (CMYK) and should be colour accurate.

Acceptable Formats:

• QuarkXpress 7.0 or below
• JPEG (Maximum Quality!)
• EPS
• PDF
• TIF
• PSD

If supplying a PDF please ensure you create your PDF using the following settings: Bicubic Downsampling at
300dpi with JPEG Compression set to Maximum Image Quality.

Note: As a precaution please embed all fonts.

Call our production specialist, Dan Grant, on 03 9005 8175 for further assistance.

Other formats:

If you are setting up your files in an Application that is not listed above you MUST convert all text to outline and
export your file using one of the Acceptable Formats - contact Dan Grant on 03 9005 8175 for further information and/or assistance.

• Images
• Logos
• Illustrations

Raster Images:
Our preference for supplied images is High Resolution (300dpi at actual size) JPEG files with compression set for best possible quality (eg: 10 or 12). You may supply in either RGB or CMYK, we will convert your RGB images to CMYK in an effort to maintain best possible color results (note: certain colors can not be reproduced in CMY, this may cause color shifts when printed).

We also accept PSD, TIFF and EPS but these files are much more cumbersome to transfer over the internet as most ISP's have a 10MB transfer limit on emails, preventing files larger than 10MB from being delivered.

If you are supplying a PSD, TIFF or EPS please ensure all text is rasterized, converted to outline or you have supplied the fonts.

Size example:
if an image is going to be printed at 125mm wide then the width in pixels should be 1475px.

An easy way to test the size at which an image will print at is:
Pixels (width or height) ÷ 11.8 = Width or Height in mm.
Example: 1475px ÷ 11.8 = 125mm
Or use an application like Photoshop to view the image size in mm!

Try to avoid the following (they will only make the image quality worse!):

• Increasing the dpi of an image in order to meet the specifications.
• Enlarging the image in Photoshop or other image manipulation program.
• Converting images to CMYK with default Color Settings (can cause serious colour faults when printed!)

Note: Performing any of the previous points may result in a poor quality reproduction!

Vector Images:
Please ensure all fonts are supplied or all text is converted to outline - vector is the preferred method for illustrations and logo's.

Warning:
Use of transparency can cause issues with certain RIP's, avoid its use when possible. If you must use transparency please let us know in advance so we can take steps to ensure correct reproduction.

Files can be supplied via ftp, email, on DVD, or on CD.
For assistance contact our production specialist, Dan Grant, on 03 9005 8175.